Shop now. Pay later. Always interest-free.

Got questions? Call us on 0800 471 4974

Got questions? Call 0800 471 4974

1Assemble
2Fit
3Use

iWALK2.0 Fitting & Use

Reading instructions is no fun but then, neither is writing them, so we’re all square. Proper fitting of your iWALK3.0 is essential. But it’s also easy. So watch our videos or read the instructions before you start with your iWALK3.0, and you’ll be iWALKing much faster than if you go it alone. We promise.

To assemble your iWALK3.0, please follow our easy-to-follow, step-by-step instructions in this video.

To get going, watch our easy to follow video. Then remind yourself of these major fitting points. Get these three things right, and you’ll succeed.

Okay, final video. When you’re done, it’s time to get iWALKing! Here’s three key tips before you set off.

HEIGHT
Adjust BOTH the upper AND lower section of the crutch to the correct height.

TIGHT
Tighten all 3 straps REALLY, REALLY TIGHT. For control and stability, you need the iWALK2.0 to become an integral part of your leg. So strap ’em down!

ANGLED RIGHT
A very important and probably most overlooked adjustment. Fortunately, it’s easy! Don’t skip this essential step, follow the instructions to the letter.

1. LOCATION
Pick an environment that allows you to take as many steps as possible without turning around or navigating around objects. Ideally, you will have a wall or rail to give you confidence. Hallways work well.

2. SURFACE
Hard level surfaces are the best. Definitely avoid padded carpets for learning.

3. BE CONFIDENT
When walking on the crutch, commit all your weight onto it, just as you would when walking normally. You’ll learn much faster than if you’re too tentative.